Inovance SV660, Руководство для продвинутых пользователей

Страница: 44 / 426

-43-
2 Installation
Item Description
IP rating
H1: IP67 (shaft opening excluded, with power cables and encoder connectors
connected properly)
H4: IP67 (shaft opening excluded, with power cables and encoder connectors
connected properly）
Altitude Below 1000 m (derating required for altitude above 1000 m)
2.2.3 Installation Precautions
Table 2-3 Installation instructions
Item Description
Rust-proof
treatment
◆
Wipe up the anti-rust agent applied at the motor shaft extension before installing the servo motor,
and then take rust-proof treatment.
Encoder
◆
Do not strike the shaft extension during installation. Failure to comply will damage the encoder.
◆
Use the screw hole at the shaft end when mounting a pulley to the servo motor shaft with a
keyway.
◆
To fit the pulley, insert a double-end screw into the screw hole of the shaft.
◆
Put a washer on the surface of the coupling end, and then use a nut to push the pulley in.
◆
For the servo motor shaft with a keyway, use the screw hole at the shaft end.
◆
For the servo motor shaft without a keyway, use friction coupling or similar methods.
◆
When removing the pulley, use a pulley remover to protect the shaft from suffering severe impact
from the load.
◆
To ensure safety, install a protective cover or similar device on the rotary area such as the pulley
mounted on the shaft.
Flange coupling , pulley
Washer
Screw