manualshive.com logo in svg

InoTec inoCOMB Cabrio, Оригинальное руководство по эксплуатации

Поделиться
Скачать
InoTec inoCOMB Cabrio Скачать руководство пользователя страница 9

 Page 9

EN

Chapter 2 Safety

2.3 Notices on the machine 

!

DANGER

  Safety notices on the machine make oper-

ating staff aware of imminent danger.

The following warning labels are attached to the small silo 
inoCOMB Cabrio:

Instructions on the switching cabinet: 
•  Pull out the mains plug before opening the housing! (1).
•  The unit may only be operated via a plug-in device that is 

protected by an RCD (FI) I

Dh 

≤ 30 mA type B (2)

•  WARNING! According to DGUV V3, a retest is required 

after every electrical modification to the machine (3).

•  This QR code will redirect you to the original operating 

instructions of the small silo and to a 3D animation of 
how it works (4).

•  Short operating instructions (5)
•  WARNING! Do not switch the machine on again for 

60 seconds after it has been switched off by the main 
switch or due to a power failure (notice on the right, on 
the side of the switching cabinet) (6).

1

2

3

4

6

5

Note on the fold-away motor of the mixing pump: 
•  Before opening, bring the engine to a standstill! (7).

7

2.2.3 Conversions and changes

!

DANGER

  Conversions or changes can put the safe-

ty of operating staff at risk and impair the functional-
ity of the machine.

•  Do not make any changes, additions or conversions to 

the machine without first consulting INOTEC GmbH 
and obtaining its written approval. Otherwise, the op-
erating license will become void.

2.2.4 Cleaning and maintaining the machine

!

WARNING

  Cleaning and maintenance work can put 

the safety of operating staff at risk and impair the 
functionality of the machine.

1.  Switch off the machine and pull out the mains plug.
2.  Secure the machine against unexpectedly being 

switched back on.

3.  Before cleaning with the water jet, cover all the open-

ings that water must not penetrate into for safety and 
functional reasons.

4.  After cleaning, remove all the covers which were at-

tached to protect against the water.

2.2.5 Changing the location of the machine

The small silo inoCOMB Cabrio can be moved on the con-
struction site with a pallet truck or a forklift.

!

CAUTION

  Changing location can put the safety of 

operating staff at risk and impair the functionality of 
the machine.

1.  Switch off the machine and pull out the mains plug.
2.  Move the machine to a new location on the building 

site.

3.  Always install the machine in such a way that it is level 

and stable.

4.  Secure the machine against undesirable movements.
5.  Reconnect the machine to the external power supply 

before restarting the machine.

Содержание inoCOMB Cabrio










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды