Page 10
EN
Chapter 2 Safety
Note on the material hopper (8):
• If there is a risk of frost, drain the water (see water fit-
ting).
8
Note on the material hopper above the type plate or mix-
ing tube (9):
• ATTENTION: Do not reach into the machine.
9
Observe all safety and danger notices attached to the
machine. Always keep the safety and hazard informa-
tion in a legible condition.
2.4 Personnel qualification
INOTEC offers training courses on the operation of the small silo
inoCOMB Cabrio. Use INOTEC service for the initial com-
missioning of the machine; this also serves as an opportu-
nity to provide operators with training on how to operate
the mixer.
!
DANGER
In case of unqualified operation of the
small silo inoCOMB Cabrio, there is a risk of danger
to life and health of the operating personnel as well
as property damage to the inoCOMB Cabrio or other
assets.
2.5 Responsibility of the operator
• Only use trained or instructed personnel to operate the
inoCOMB Cabrio small solos.
• Define employees’ responsibilities for operating, setting
up, maintaining and servicing the machine clearly.
• Only task untrained staff or individuals who have not re-
ceived any instruction with operating the machine when
there is a trained or instructed specialist available to su-
pervise them.
• Only have work on the electrical control system carried
out by a qualified electrician.
• When using a sprayer, never point it at people or at ob-
jects in danger.
2.6 Personal protective equipment (PPE)
!
CAUTION
PPE – particularly gloves, safety boots,
a safety helmet and safety goggles and respiratory
protection – must be used. Even though the small silo
inoCOMB Cabrio does not cause increased noise expo-
sure, we recommend the use of hearing protection on
the construction site.
