Page 7
EN
Chapter 2 Safety
1.3.3.2 Warranty claims
Claims apply only where material or manufacturing faults
exist and where machinery has been used properly. Wear
parts are not covered by the warranty. All claims shall be-
come void if third-party parts are installed, where the ma-
chinery has been improperly used or stored and in the event
of obvious non-compliance with the operating manual. In
this connection, we refer you to our General Terms of Busi-
ness.
1.3.4 Carrying out repairs
Repairs may only be carried out by employees at our INO-
TEC service centres.
2 Safety
2.1 Intended use
You may only operate this machine if the following
conditions are met:
• The small silo inoCOMB Cabrio is suitable for mixing,
conveying and spraying or placing all factory premixed
and machine-compatible dry mortars, screed materials
and floor levelling compounds. The machine can be
fed with powdered material from sacks, from one-way
containers (with the inoFLEX Duo dry conveying unit),
from big bags (with an attachment bonnet or with the
big bag box Mono).
• In the mixing phase, a paste-like product is created by
adding water.
• The material is pumped to the processing location by
means of mortar hoses. There, it is applied to walls
and ceilings with appropriate spray/adhesive guns or a
reprofiling sprayer or poured directly onto the floor.
• Only use the machine within its limits of application
and according to the technical data.
• Pay particular attention to the safety and warning
notices outlined in this original operating manual.
!
DANGER
Failure to use the inoCOMB Cabrio, the
user is threatened with danger to life and limb as
well as impairment of the inoCOMB Cabrio or other
assets.
!
WARNING
Danger due to misuse!
Misuse of the inoCOMB Cabrio can lead to dangerous
situations.
• Never use the inoCOMB Cabrio small silo to produce oth-
er products such as food.
• Never use the small silo inoCOMB Cabrio outside the val-
ues specified in the “Technical data”.
