Inner Range IQ plus, Руководство программиста

Страница: 7 / 98

Ver. 3.604 (31/03/05) p7
INNER RANGE IQ. PLUS Programmer’s Manual.
PROG
HOME
CLR
ENTER
ON
*
OFF
#
0
1 2 3
4 5
6
7 8
9
2. THE IQ TERMINAL
2.1 KEY FUNCTIONS.
PANIC. Keys 1 & 3 pressed simultaneously.
FIRE. Keys 4 & 6 pressed simultaneously.
MEDICAL. Keys 7 & 9 pressed simultaneously.
REX (Request to Exit) <OFF>key.
Used with Access Control on Enhanced Terminals
PROG/NEXT Select a Programming Address or system information option.
ON Arms System (Single Area system) Arms Area assigned to the Terminal (Multi-
Area System, Single Area Terminal mode) Arms all Areas in User’s Area List
(Multi-Area System, Multi- Area Terminal mode)
HOME Arms System in Home mode (Single Area system) Arms Area assigned to the
Terminal in Home mode (Multi-Area System, Single Area Terminal mode) Home
Arms all Areas in User’s Area List in Home mode (Multi-Area System, Multi-
Area Terminal mode)
OFF Disarms System (Single Area system) Disarms Areas assigned to the Terminal
(Multi-Area System, Single Area Terminal mode) Disarms all Areas in User’s
Area List (Multi-Area System, Multi-Area Terminal mode)
CLR Logoff the Terminal. Exit the current Mode of operation)
ENTER Saves the data entered in a programming Address.
Key Combination Examples (Programmable in General Options)
1, ON Quick Arm (Single Area System, no pin code)
1, HOME Quick Arm Home Mode (Single Area System, no pin code)
(N), ON Quick Arm Area (N = 1-8) (Multi Area System, no pin code)
(N), OFF Quick DisArm Area (N = 1-8) (Multi Area System, no pin code)
0,ON Arms all Areas in User’s Area List (Multi-Area System, Single Area Terminal
mode)
0,HOME Home Arms all Areas in User’s Area List (Multi-Area System, Single Area
Terminal mode)
0,OFF Disarms all Areas in User’s Area List (Multi-Area System, Single Area Terminal
mode)
2.2 BEEPER INDICATIONS.
2 or 3 Short Beeps: A User, Master or Installer function was successful.
1 Long Beep: A User, Master or Installer function has been unsuccessful.
When an error is detected, the beeper tones will sound at a
lower pitch until a correct operation is successfully performed.
Continuous Short Beeps * : Entry Delay Timer, Exit Delay Timer or Auto-arm Warning.
NOTE: AUTO-LOGOFF: The Terminal will automatically logoff the operator if there is
no keypad activity detected for 3 Minuets.