Ver. 3.604 (31/03/05)
p55
INNER RANGE IQ. PLUS Programmer’s Manual.
AREA 4 CLIENT CODE
This is the 4 digit Client Code used for Area 4 (blank by default) in Multi-Area systems when reporting to a Central Monitoring Station in
Contact ID format. If no Client Code is programmed for Area 4, the Area 1 Client Code will automatically be used.
AREA ENTRY DELAY PROGRAMMING.
These Addresses set the Entry time to be applied to Zone Inputs programmed as Delayed Zones.
i.e. Zone Types
1 (Delayed),
2 (Handover),
5 (Away Delayed/Home Isolate),
6 (Away Delayed/Home Delayed)
and
7 (Away Delayed/Home Instant)
GENERAL AREA / AREA 1 ENTRY DELAY TIME
AREA 2 ENTRY DELAY TIME
AREA 3 ENTRY DELAY TIME
AREA 4 ENTRY DELAY TIME
AREA EXIT DELAY PROGRAMMING.
These Addresses set the Exit time to be applied to Zone Inputs programmed as Delayed Zones.
i.e. Zone Types 1 (Delayed) and 2 (Handover).
GENERAL AREA / AREA 1 EXIT DELAY TIME
AREA 2 EXIT DELAY TIME
AREA 3 EXIT DELAY TIME
AREA 4 EXIT DELAY TIME
Note: Area 4 Exit Delay is not used when Armed as a Sub-Area. The controlling Area Exit Delay is used.
AREA 1 TO AREA 4 ARMING OPTIONS (TIMEZONE CONTROL)
The Area Arming options allow a TimeZone to be assigned to the Area causing the Area to automatically Arm when the TimeZone goes
Valid.
Note that when the TimeZone goes Valid and the Area Arms, it does not force the Area to remain in the Armed state for the duration of the
Valid period.
ADDRESS
DEFAULT
FUNCTION
(Data Type)
Spare
(Value Data)
30 Seconds
30 Seconds
30 Seconds
30 Seconds
Spare
(Value Data)
60 Seconds
60 Seconds
60 Seconds
60 Seconds
Spare
(Value Data)
524
525-530
531
532
533
534
535-540
541
542
543
544
545-550
