Inficon HAPSITE ER Скачать руководство пользователя

Страница: 45 / 436

INFICON

HAPSITE Components and Assemblies | 8

074-471-P1E HAPSITE ER Operating Manual

45 / 436

8.3 Battery

The battery provides power to HAPSITE ER when portability is desired. Under

optimum conditions, the battery has a two hour life. The battery can be charged using

the battery charger. Alternately, it can be charged in the HAPSITE ER when it is

connected to external power. However, the battery will charge more slowly when

charging inside HAPSITE ER.

8.3.1 Battery Charger

The auxiliary battery charger (part number 930-470-G1) uses AC power to charge up

to three HAPSITE ER batteries in 15 hours or less.

CAUTION

The battery charger is not sealed against moisture, debris, or

contamination.

The battery charger operates from a range of normal AC voltages from 100 to 230

V(ac). It will continue to operate without internal damage at a voltage as low as 90

V(ac) and as high as 253 V(ac). The frequency can be from 50 to 60 Hz. The battery

charger draws 120 W when fully loaded.

The battery charger is designed for indoor use at ambient temperatures from 5°C to

35°C (41°F to 95°F). The battery charger is not designed for exposure to

contaminants, as it cannot be decontaminated.

8.3.2 Battery Charger Connections and Startup

Plug the power cord into the connector at the right rear of the battery charger.

Plug the battery charger into a grounded outlet.

The

indicator on the battery charger illuminates. The battery charger does

not have a power switch.

Содержание HAPSITE ER





















































































































































































































































































































































































































































Результаты поиска

Содержание HAPSITE ER

Отзывы:

Похожие инструкции для HAPSITE ER

Бренды по названию

Популярные бренды

Inficon HAPSITE ER, Руководство по эксплуатации

Результаты поиска

Содержание HAPSITE ER

Отзывы:

Похожие инструкции для HAPSITE ER

Бренды по названию

Популярные бренды