Inficon HAPSITE ER, Руководство по эксплуатации

Страница: 144 / 436

11 | Laptop Operation INFICON
144 / 436 074-471-P1E HAPSITE ER Operating Manual
11.3.2 Tenax Concentrator
The Tenax concentrator is also used for analyzing samples with concentration levels
in the low part per million to high part per trillion range. The Tenax concentrator will
not effectively concentrate compounds with boiling points below 80°C, but may be
more effective at concentrating compounds with higher boiling points.
WARNING
The Tenax concentrator will not effectively concentrate compounds with
boiling points below 80°C.
Once installed, the concentrator must be cleaned before sampling begins.
ü
Verify that the concentrator is installed.
1 When powered on (refer to Operate the Instrument in Portable Mode [
}
51]) or
taken out of Extended Standy (refer to Extended Standby [ } 105]), HAPSITE
ER will automatically start preparing a concentrator method. If the method that
HAPSITE ER begins preparing is not the desired one, refer to Selecting a New
Method [ } 149].
2 Power on the laptop by pushing the POWER button. Open ER IQ Software by
double-clicking on the ER IQ icon.
3 HAPSITE ER will begin preparing to run the default concentrator method. It will
heat all necessary components, check pressures, and run an AutoTune, if
necessary. Progress of the heaters is indicated by a bar graph on the laptop
screen.
4 When the AutoTune is finished, the following message will be displayed. Click
OK .