Inficon HAPSITE ER Скачать руководство пользователя

Страница: 133 / 436

INFICON

Communications and Touch Screen Options | 10

074-471-P1E HAPSITE ER Operating Manual

133 / 436

This device may not cause harmful interference, and

This device must accept any interference received, including interference that

may cause undesired operation.

CAUTION

To maintain compliance with FCC standards and regulations and to

ensure the proper operation of the wireless communication system used

within the HAPSITE ER instrument, ONLY use the antenna that was

originally supplied with the instrument. If damage occurs to the original

antenna, please contact the INFICON service department for a

replacement antenna (see Customer Support [

}

19] for contact

information).

10.4.1.1 FCC Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

• Consult the dealer or an experienced radio/TV technician for assistance

10.4.1.2 FCC RF Exposure Statement

WARNING

To satisfy RF exposure requirements, this device and its antenna must

operate with a separation distance of at least 20 cm from all persons and

must not be co-located or operating in conjunction with any other

antenna or transmitter.

Содержание HAPSITE ER





















































































































































































































































































































































































































































Результаты поиска

Содержание HAPSITE ER

Отзывы:

Похожие инструкции для HAPSITE ER

Бренды по названию

Популярные бренды

Inficon HAPSITE ER, Руководство по эксплуатации

Результаты поиска

Содержание HAPSITE ER

Отзывы:

Похожие инструкции для HAPSITE ER

Бренды по названию

Популярные бренды