70
Configuration File Handling
snmp community public rw
…
framerelay
exit
SN#
9.7 Copy Configurations to and from a Remote Storage
Location
Configuration Files may be copied from local memory (persistent or volatile region) to a remote data
store. Remember the different store locations; they are the local memory in your SmartNode and the
remote data store on a server system. See Figure 9-3. A remote storage location is mostly used to
store ready configurations for later download to a certain SmartNode. A TFTP server has to be used
as a remote data store. From within SmartWare this remote TFTP server is represented by the
memory region
tftp:
in combination with the IP address of the TFTP server and the name and path of
the configuration file. We will explain the usage of the remote memory region
tftp:
in the following
section more detailed. Another typical task is uploading the current running configuration to the
remote data store for backup purpose, or if an extensive configuration file is to be edited on the
remote host. In this case the running configuration, named
running-config
, which is to be found in the
volatile memory region
system
: is transferred to the TFTP server. On the TFTP server the running
configuration is stored to a file whose name is defined as one of the arguments of the
copy
command.
Figure 9-3: Remote Memory Regions for SmartWare
Finally configuration files, i.e. the startup configuration or a user-specific configuration that is stored
in the persistent memory region
nvram:
are often uploaded to the remote data store for backup, edit
Software Configuration Guide, Revision 1.03
