About This Guide
13
Command
Description
[ ]
Elements in square brackets ([ ]) are optional.
{a | b | c}
Alternative but required keywords are grouped in braces ({ }) and are
separated by vertical bars ( | ).
Table 1-2: Command Description
Example
Description
SN
The leading
SN
on a command line represents the nodename of the
SmartNode
boldface screen
Information you enter is in
boldface screen
font.
screen
Terminal sessions and information the system displays are in
screen
font.
< >
Nonprinting characters are in angle brackets (< >), e.g. <?> which shows
the available commands in any mode or necessary arguments of a
command.
#
An hash sign at the beginning of a line indicates a comment line.
Table 1-3: Example Description
How to Read this Guide
SmartWare is a complex and multifaceted operating system running on your SmartNode. Without
the necessary theoretical background you will not be able to understand and consequently use all the
features available. Therefore we recommend reading at least the chapters listed below to get a
general idea about SmartWare and the philosophy of contexts used for IP and circuit switching
related configuration.
•
Chapter 1, “Terms and Definitions”,
•
Chapter 3, “System Overview”,
•
Chapter 11, “IP Context Overview” and
•
Chapter 20, “CS Context Overview”
We at Inalp Networks AG, hope you find this guide useful, whether you are a novice or professional
working with SmartNode devices and SmartWare responsible for convergent telephony and
networking solutions.
E-mail your comments to the following address:
[email protected]
Software Configuration Guide, Revision 1.03
