Session Router Configuration
213
Software Configuration Guide, Revision 1.03
table entries.
22.6.6 Create a Time of Day Routing Table
The time table is used to route calls based upon the current system time during one day, i.e. an 24hr.
period from midnight to midnight. Times are matched within the ranges defined in the time routing
table.
Procedure
To create a time of day routing table
Mode
Context CS
Command
Purpose
Step 1
node
(ctx-cs)[
switch
]#time
tbl-name
key
dest-
interface
if-name
or
node
(ctx-cs)[
switch
]#time
tbl-name
key
dest-
table
tbl-name
Create a time routing table by adding
the first line.
Step 2
Repeat step 1 to add lines for multiple
table entries.
Example: Time of Day Routing Table
SN(ctx-cs)[switch]#
time workday1 08:00-17:00 dest-table BestQuality
SN(ctx-cs)[switch]#
time workday1 17:00-21:00 dest-interface
VoIPCarrierA
SN(ctx-cs)[switch]#
time workday1 21:00-08:00 dest-interface
VoIPCarrierB
22.6.7 Create a Day of Week Routing Table
The Day of Week table is used to route calls according to the day of the week. The days are defined
by the abbreviations mon; tue; wed; thu; fri; sat; and sun. To configure weekday routing table entries
use the following commands starting in the CS context configuration mode.
Procedure
To create a day of week routing table
Mode
Context CS
Command
Purpose
Step 1
node
(ctx-cs)[
switch
]#weekday
tbl-name
key
dest-interface
if-name
or
node
(ctx-cs)[
switch
]#weekday
tbl-name
key
dest-table
tbl-name
Create a day of week routing table by
adding the first line.
Step 2
Repeat step 1 to add lines for multiple