manualshive.com logo in svg

Inalp Networks SmartWare R2.00, Руководство по настройке программного обеспечения

Продукт Inalp Networks SmartWare R2.00 - это программное обеспечение, которое поможет вам настроить вашу сеть более эффективно. Вы можете загрузить бесплатное Software Configuration Manual с нашего веб-сайта, чтобы получить подробное руководство по настройке всех функций и возможностей этого продукта. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

System Image Handling 

 

57

 

• 

Configuration files have to be stored in the logical region 

nvram:

 of the flash memory. The 

factory default configuration is always loaded, and may be restored by pressing the 
SmartNode reset button; see the 

Hardware Configuration Guide

. The startup, or user-specific 

configuration, is also stored in 

nvram

. 

 
The factory configuration is read-only, and is contained in the persistent memory in the logical 
region 

nvram: 

of the SmartNode. It can be used if no user-specific configuration is available to start-

up SmartWare with a minimal functionality. This configuration is named “factory-config” in the 
SmartWare terminology. A dedicated user-specific configuration has to be created and stored in the 
flash memory. This configuration defines the user’s desired system functionality and is used to start-
up the system under normal conditions. This configuration has to be stored as “default-config” in the 
logical region 

nvram: 

of flash memory. Any configuration stored within the persistent memory in the 

logical region 

nvram: 

can be copied to a remote server using TFTP. 

 
Since configurations are not executable from persistent memory, any configuration that is to be used 
has to be copied into the volatile memory of the SmartNode prior to operation. This procedure takes 
place after the system bootstrap, where the application image (i.e. SmartWare) is started and a 
configuration must be available. Shortly before SmartWare is fully started up the configuration 
“startup-config” is copied from the logical region 

nvram: 

of flash memory as the “running-config” 

into the volatile memory 

system:

 of the SmartNode. The volatile memory 

system: 

is a logical region 

within the random access memory (RAM) of the SmartNode.  
 
Changing any settings during operation of a SmartNode alter the running configuration, i.e. that 
named “running-config” in the volatile memory 

system:

. In order to have such modifications 

available after the next system start, the running configuration must to be stored back as “startup-
config” to the persistent memory 

nvram:

. Furthermore it is possible to backup the “running-config” 

in the volatile memory 

system:

 with a user-defined name in persistent memory 

nvram:

 or on a remote 

TFTP server. 
 

Software Configuration Guide, Revision 1.03 

Содержание SmartWare R2.00


































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SmartWare R2.00

Campbell PC208 Instruction Manual preview
PC208
Бренд: Campbell Страницы: 133
F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Бренд: F-SECURE Страницы: 90
Arturia JUPITER-8V 2 User Manual preview
JUPITER-8V 2
Бренд: Arturia Страницы: 125
Omron WS02-NCTC1-E - 07-2001 Operation Manual preview
WS02-NCTC1-E - 07-2001
Бренд: Omron Страницы: 116
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Бренд: AVG Страницы: 52
ESET SMART SECURITY User Manual preview
SMART SECURITY
Бренд: ESET Страницы: 38
DeLorme XMap 7 GIS Getting Started Manual preview
XMap 7 GIS
Бренд: DeLorme Страницы: 29
Intel SMALL BUSINESS SERVER Manual preview
SMALL BUSINESS SERVER
Бренд: Intel Страницы: 79
MGI PhotoSuite Manual preview
PhotoSuite
Бренд: MGI Страницы: 19
GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual preview
AURORA EDIT - INSTALLATION V7.1
Бренд: GRASS VALLEY Страницы: 152
LEI Extras MapCreate Canada 6.3 Topo Addendum Manual preview
MapCreate Canada 6.3 Topo Addendum
Бренд: LEI Extras Страницы: 1
Xerox DocuColor 242 User Manual preview
DocuColor 242
Бренд: Xerox Страницы: 32
Iqinvision IQ510 Manual preview
IQ510
Бренд: Iqinvision Страницы: 60
EAW EAWPilot User Manual preview
EAWPilot
Бренд: EAW Страницы: 36
DataCard 7000 Series Specifications preview
7000 Series
Бренд: DataCard Страницы: 2
HP D530 - Compaq Business Desktop Reference Manual preview
D530 - Compaq Business Desktop
Бренд: HP Страницы: 77
HP Data Protector Manual preview
Data Protector
Бренд: HP Страницы: 60
HP Data Protector A.06.1x Overview preview
Data Protector A.06.1x
Бренд: HP Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды