imagistics ipc1- im8130, Руководство администратора

Страница: 349 / 377

ipc1-im8130 Administrator’s Guide 327
Document Sticky The paradigm where actons and/or settings for a print job are
assigned for a specific document within a specific application. For
example, if a change is made to the printer settings, it only affects the
current document within the current application. See also, Printer
Sticky.
Driver See Printer Driver .
Duplex The process of printing on both sides of a sheet of paper. For duplex
printing, the copier must have an
A utomatic D uplex U nit (ADU)
installed. See also Simplex .
Electronic
Document
Processing System This system consists of the Imagistics im8130/im6530 digital copier
connected to the ipc1-im8130 controller. These systems provide the
convenience of walk-up copying, scanning, and network printing from
the same device.
Ethernet A local area network (LAN) standard developed by Xerox, Digital, and
Intel (IEEE 802.3). It is the most widely used LAN access method.
Token Ring is next. Ethernet is normally a shared media LAN. All
stations on the segment share the total bandwidth, which is one of 10
Mbps (Ethernet), 100 Mbps (Fast Ethernet), or 1000 Mbps (Gigabit
Ethernet).
Event A significant occurrence such as the completion of a print operation.
Finishing unit or
Finisher A copier accessory that provides sort, group, staple, and hole punch
printing and copying options.
Fragment threshold Defines the size above which an RF data packet is split up, or
fragmented, for transmission.
Frame A data packet sent through the network. There are several types of
frames, which differ in the way the data is arranged. In order for the
different nodes within a network to communicate, the same frame type
must be setup for each.
Gateway address The IP address of the router that the controller uses to access devices
on other subnets.
ipc1-im8130 The Imagistics controllers used to connect digital copiers to a network.
Also referred to as the
device or printer .
Gutter The size of the inner margin between facing pages of a bound
document. The minimum value is 0 mm and the maximum is 150 mm.
Definitions of Common Terms
Term Definition
im6530, im8130