imagistics ipc1- im8130 Скачать руководство пользователя

Страница: 54 / 377

ipc1-im8130 Administrator’s Guide

There are two ways to update the operating system:

Boot the controller from the

ipc1-im8130 Recovery CD-ROM

Perform an

OS U

PDATE

from the copier control panel. This is the

recommended method of updating the OS software. The controller

performs a backup operation and saves the administrator password,

network settings, scan templates, address book, and other settings

which are then restored following the update.

This section provides procedures for performing each method of operating

system update.

Update from the

ipc1-im8130 Recovery CD-ROM

Power up the system if it is not already running.

Immediately insert the

ipc1-im8130 Recovery CD-ROM

into the drive.

If the controller was already up, reboot it. The flashing light on the

CD-ROM drive indicates the controller is trying to boot off of the CD.

If this light does not flash, leave the CD in the drive and reboot the

controller.

Check the LCD touch screen on the copier. It displays the following

message as the controller boots off of the CD-ROM:

Starting

controller. Please wait.

When the controller finishes booting up, a process that takes almost

three minutes, the

Offline OS Update Version

screen opens:

The Offline OS Update Version Screen

If this screen does not open, the controller did not boot from the CD

successfully.

Press

to continue. The controller begins copying the software from

the CD to the hard drive. This process takes approximately five

im6530, im8130

Содержание ipc1- im8130


























































































































































































































































































































































































Результаты поиска

Содержание ipc1- im8130

Отзывы:

Похожие инструкции для ipc1- im8130

Бренды по названию

Популярные бренды

imagistics ipc1- im8130, Руководство администратора

Результаты поиска

Содержание ipc1- im8130

Отзывы:

Похожие инструкции для ipc1- im8130

Бренды по названию

Популярные бренды