imagistics ipc1- im8130, Руководство администратора

Страница: 55 / 377

ipc1-im8130 Administrator’s Guide 33
minutes, during which time the touch screen displays the
OS Update
Progress
screen.
6 When the system update process completes, the CD-ROM is ejected
and the touch screen displays
Press the START key to start
controller
.
7 Remove the CD-ROM from the drive and press the
START
button. You
must remove the CD-ROM before the controller can boot up.
8 After boot up, an initialization process begins. This takes
approximately 10 minutes. During that time, the touch screen
displays
Processing Controller update, don’t switch off
.
9 When communications with the copier resume, a test page prints out
on the copier and the front panel becomes operational again. The
controller software version printed on the test page should match the
update version. If so, the system update has completed successfully.
If you experience problems during the update process, or if the
system does not come back online after the update process
completes, contact your Imagistics authorized dealer for support.
Update OS From Control Panel
1 Press the
PRINTER/NETWORK
hard key on the copier control panel.
2 Press the
ADMIN
tab.
3 Log on to perform administrative functions.
4 Press
SYSTEM UPDATE
to display the System Update menu.
System Update Menu
im6530, im8130