imagistics ipc1- im8130, Руководство администратора

Страница: 185 / 377

ipc1-im8130 Administrator’s Guide 163
This command creates a print queue using the system
lpadmin
command. It also creates a configuration file that has the destination
IP address or host name. Use the configuration file to change print
queue parameters.
The
lpadmin
command stores the printer interface file in the
/etc/
lp/interfaces
directory in a file with the same name as the print
queue. The configuration file is usually stored in the
/etc/lp/
interfaces
directory in a file named
<queue name>.conf
where
<queue name>
is the name of the print queue.
Under Linux, you must restart the lpd.
Deleting a Print Queue
1 Log on to the root account.
2 Enter the following command:
ipc1im8130rm <queue name>
This command uses the system
lpadmin
command to delete the print
queue and configuration file.
Under Linux, you must restart the lpd.
Changing the Default Values of a Print Queue
1 Study the interface file, named <
queue name
>, which is stored in the
/etc/lp/interfaces
directory.
This file contains all of the default settings and values that you can
set. These values are case sensitive and must conform to the
/bin/sh
variable format.
2 To manually edit the configuration file:
/etc/lp/interfaces/<queue name>.conf
or
/opt/imagistics/tap/interfaces/<queue name>.conf
or
/opt/imagistics/tap/filter/<queue name>.conf
add a line that consists of the parameter and value.
For example, to change the default orientation to Landscape, add the
following line:
orient=
“
LANDSCAPE
”
To learn the valid options that you can enter in the
<queue name>.conf
file:
im6530, im8130