SEL-1FS1/SEL-2FS1 and SEL-1XD1/SEL-2XD1
Installation and Operation Manual
Installation, Operation, and Specifications
© 2015 Imagine Communications Corp.
Proprietary and Confidential.
Version 2.8 | Page 98
Table 15:
DTS Neural Surround Audio MultiMerge Parameters
Parameter Name
Function
Options
MultiMerge Status
Indicates the state of the AAP mode
•
Uninitialized
•
Running
•
Not Running (bypassed)
•
Not Running
Input Selection Mode
Specifies how input channels are selected.
•
Mix
•
Multi
•
Stereo
•
Aux
•
Multi Detect
•
Stereo Detect
•
Aux Detect
•
Multi Aux Stereo
Detected Input [RO]
Reports the current inputs that are included
in the output
•
Unknown
•
Mix
•
Multi
•
Stereo
Input Noise Floor
Threshold
Specifies the amount of signal required when
detecting active inputs
-80 dB to -50 dB (
-60 dB
)
Input Crossfade Time
Specifies the transition time between inputs
when switching due to detected level
changes
50 ms to 750 ms (
200 ms
)
MultiMerge Mode
The operation mode for MultiMerge
•
Auto
•
Pass Through
•
Up Mix
Latency
Specifies the latency profile of the
MultiMerge
•
Low
•
High
Noise Floor Threshold Specifies the signal level that must be
detected on any of the C, LFE, Ls or Rs for the
content to be considered surround
-80 dB to -50 dB (
-60 dB
)
Crossfade Time
Specifies the transition time between up-mix
and passthrough when in auto mode
50 ms to 750 ms (
200 ms
)
Upmix Depth
Specifies the amount of front-to-back bias to
apply to the standard soundstage
-100 to 100 (
0
)
Upmix Front Width
Specifies the amount of narrowing or
widening to perform on the front channels
-100 to 100 (
0
)
Upmix Surround Width Specifies the wideness of the surround
channels
-100 to 100 (
0
)
