SEL-1FS1/SEL-2FS1 and SEL-1XD1/SEL-2XD1
Installation and Operation Manual
Installation, Operation, and Specifications
© 2015 Imagine Communications Corp.
Proprietary and Confidential.
Version 2.8 | Page 105
Parameter Name
Function
Options
Compressor
Threshold
Controls the amount of attenuation applied
when short-term peaks exceed the compressor
threshold
0 dB to 16 dB (
5 dB
)
Compressor Ratio
Controls the amount of attenuation applied
when short-term peaks exceed the compressor
threshold
0% to 100% (
40%
)
Loudness Shaping
Specifies the amount of loudness shaping
desired
0.0 to 1.0 (
0.5
)
Final Limiter Ceiling Specifies the threshold above which final
limiting will be applied
-20 dBFS to 0 dBFS (
0 dBFS
)
Metering
Activates the real-time meter.
•
Off
•
On
Current Input
Loudness [RO]
Reports the smoothed input loudness
measurement
-60 dBEq to 20 dBEq
(
0 dBEq
)
Current Input Peak
[RO]
Reports the input peak measurement
-60 dBFS to 20 dBFS (
0 dBFS
)
Current Output
Loudness [RO]
Reports the smoothed output loudness
measurement
-60 dBEq to 20 dBEq
(
0 dBEq
)
Current Output Peak
[RO]
Reports the output peak measurement
-60 dBFS to 20 dBFS (
0 dBFS
)
Current Correction
[RO]
Reports the amount of correction being applied
-60 dB to 60 dB (
0 dB
)
Current Compression
[RO]
Reports the amount of compression being
applied
-60 dB to 60 dB (
0 dB
)
Audio Input Delay and Sync
The
Audio Input Delay and Sync
block includes the following controls:
•
De-Embedding, AES, and Expansion Sample Rate Conversion
•
De-Embedding, AES, and Expansion Synchronization
•
De-Embedding, AES, and Expansion Delay
•
Delay for Advanced Audio Processing
The
Advanced Audio Processing
and
Embedding
blocks of parameters contain additional controls for
Dolby, DTS Neural, and DTS Neural Surround options.
