SEL-1FS1/SEL-2FS1 and SEL-1XD1/SEL-2XD1
Installation and Operation Manual
Installation, Operation, and Specifications
© 2015 Imagine Communications Corp.
Proprietary and Confidential.
Version 2.8 | Page 74
Dual Channel Operation
In the two-channel versions of the FS1 and XD1, both channels are completely independent except for
frame genlock reference. There is one frame reference, and it is shared by all of the modules in each
frame.
Live I-Wings Mode
The
Live I-Wings
mode displays video or graphics on the two "wings" on either side of an SDI signal
located within a larger aspect ratio signal (requires the SELOPT-SK-XD dual-channel upgrade license key).
Figure 50:
I-Wings Mode
Live I-Wings
integrated content insertion keys HD- or SD-SDI content into the sidebar portion of the
output image raster using the module’s internal keyer. This option is useful, for example, in applications
where upconversion of SD-SDI 4:3 content is being performed, and insertion of additional content is
required in the 16:9 upconverted image raster's sidebars.
To set up the
Live I-Wings
feature, follow these steps:
1.
Ensure that SDI 1 and SDI 2 inputs have compatible frame rates.
An
SDI 1
Standard Mismatch
or
SDI 2 Standard Mismatch
alarm is activated if the two inputs are
not compatible. In that event, the module automatically generates a black background, replacing the
SDI 2 input until a valid input is received.
2.
Set the ARC parameters as required.
Live I-Wings will only appear in the background area. Therefore, ARC settings that are anamorphic
will block I-Wings from appearing.
3.
Select
Live I-Wings
in the
Operation Mode
parameter of
Output Format and Mode.