SEL-1FS1/SEL-2FS1 and SEL-1XD1/SEL-2XD1
Installation and Operation Manual
Installation, Operation, and Specifications
© 2015 Imagine Communications Corp.
Proprietary and Confidential.
Version 2.8 | Page 59
Use the LogoCreator software utility (provided on our website) to convert graphics files to the .mg2
format.
Figure 38:
Progression of Logo to On-Air Signal
The files that you use as logos must be selected according to the video output standard set on the
module's
SDI 1
(or
SDI 2
)
Output
format. When the output standard changes on the module, the FS1
and XD1 automatically loads files that use the selected output standard.
Basic Steps to Installing Logo Files
If you are starting with existing graphics files, these basic steps are described in the following pages:.
•
Step 1: Install LogoCreator Software (on page
59
)
•
Step 2: Convert Files to the .mg2 Format (on page 60)
•
Step 3: Transfer the Logos to the SD/SDHC Card, and to the Module (on page 62)
•
Step 4: Set the Parameters and Load the Logo Files (on page 62)
Step 1: Install LogoCreator Software
All logos used by the FS1 and XD1 must be either generated as .mg2 files, or converted to that format.
LogoCreator software is contained in the
Icon
application, found on our website.
For best results, LogoCreator requires a PC with the following system specifications:
•
Intel Pentium III processor at 500 MHz or faster
•
512 MB or more of physical memory (RAM)
•
Microsoft
®
Windows
®
XP, Windows 2000, Windows Vista, or Windows 7
If a version of LogoCreator already exists on the PC, ensure that you first uninstall the program and
restart the computer. Then proceed with the steps below:
1.
Close all other software applications running on the PC and then insert the IconTools CD-ROM into
the computer’s CD-ROM tray.
2.
Using Windows Explorer, browse to the CD-ROM contents, and then double-click the
LogoCreator
folder.
3.
Double-click
Setup.exe
.
4.
When the
IconTools 3 Setup
box appears, click
Next
, and then follow the on-screen installation
instructions.