SEL-1FS1/SEL-2FS1 and SEL-1XD1/SEL-2XD1
Installation and Operation Manual
Installation, Operation, and Specifications
© 2015 Imagine Communications Corp.
Proprietary and Confidential.
Version 2.8 | Page 75
Figure 51:
Creating the Live I- Wings Effect
Converter Fast Switch (XD1)
The
Converter Fast Switch
mode makes it possible to switch between an HD-SDI signal and an SD-SDI
signal without sync problems. To enable this feature, select
Operation Mode > Converter Fast Switch
.
Then select your input standards in
Fast Switch Input HD Std Sel
and
Fast Switch Input SD Std Sel
. (HD-
SDI is always on channel 1; SD-SDI is always on channel 2.)
Once the standards are selected, switching can only happen between these two channels. Depending on
the input standard that's feeding into the system, use the corresponding channel parameters for status
and controlling. On the
output
side, there is no additional routing selection. Switching between two
processing channels occurs automatically, based on the input standard feeding into the system.
When the XD1 module is in
Converter Fast Switch
mode, the
Frame Delay
,
H-Phase
, and
V-Phase
for
processing channel 2 must follow the
Frame Delay
,
H-Phase
and
V-Phase
settings of processing channel
1. Once enabled,
Converter Fast Switch
takes effect in 150 ms.
