CMN-91
Installation and Operation Manual
Installation
© 2016 Imagine Communications Corp. Proprietary and Confidential.
Revision D | Page 37
The IP configuration utility main dialog box opens:
Figure 12:
IP Configuration Utility Main Dialog Box
Leave the NIC Adaptor field set to Auto select unless you know which adaptor in your PC is
connected to the CMN-91.
3.
To establish a connection, the MAC address of your CMN-91 must be entered in the MAC Address
field. Your device’s MAC address is located in the following places:
In the main title bar
When delivered from the factory, the CMN-91 displays the MAC address in the main title bar.
Once IP configuration has been performed, this behavior can be changed through the device’s
Unit Configuration Display Setup menu (see Unit Configuration Setup Menu (on page
) for
more information) so it may not be located there when reconfiguring the IP address after the
initial installation. However, the MAC address is always displayed in the main title bar for a few
seconds after powering up the device, regardless of the menu setting.
In the About Display Screen (see About Menu (on page
) for more information)
This will only be useful if the IP address is already known, since you must connect to the device
using the Web RCU or RCU-CMS to use the menu to view the About Display Screen.
On a label applied to the top of the device
The first three segments of the MAC address already appear in the MAC address field. Only the last
three segments need to be entered.
4.
Click Get (located in the From Device group of the main dialog box).
The utility collects all of the IP configuration information and displays it in the From Device group.
5.
Click Copy to copy the fields from the From Device group to the To Device group.