Imagine communications CMN-91 Скачать руководство пользователя страница 166 | Manualshive

Страница: 166 / 195

background image

CMN-91

Appendix B

Installation and Operation Manual

Copyrights

© 2016 Imagine Communications Corp. Proprietary and Confidential.

Revision D | Page 166

Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:



Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.



Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the
distribution.



Neither the name of Sparta, Inc. nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Cisco/BUPTNIC Copyright Notice (BSD)

Copyright © 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and
Telecommunications. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:



Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.



Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the
distribution.



Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names
of their contributors may be used to endorse or promote products derived from this software
without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

«
...
164
165
166
167
168
...
»

Содержание CMN-91




































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CMN-91

Бренд: GardePro Страницы: 49

Бренд: Joycare Страницы: 68

Бренд: Sanitas Страницы: 80

Бренд: brennenstuhl Страницы: 66

Бренд: A&D Страницы: 100

DuraVision FDX1501-A

Бренд: Eizo Страницы: 71

Бренд: CyberView Страницы: 20

Бренд: ViewSonic Страницы: 81

UltraView HAP15AV

Бренд: I-Tech Страницы: 28

Бренд: Good Display Страницы: 17

Бренд: Parker Страницы: 52

Бренд: ViewSonic Страницы: 26

Бренд: AOC Страницы: 74

Бренд: VETEC Страницы: 16

Бренд: A&D Страницы: 2

Babymonitor 800

Бренд: stabo Страницы: 16

Бренд: NEC Страницы: 113

Rapport-10HD/PRO

Бренд: Wonwoo Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды