IHIMER 9VXE, Оригинальное руководство пользователя, Страница: 97 / 118

MAINTENANCE
9VXE EN 3-28
INTAKE AIR SYSTEM
Inspect and Clean Air Cleaner Element
WC-C300490
2
4
3
2 1
1. Stop the engine.
2. Remove the cover (1) and take out the
element (2).
3. Clean the inside of the cover and the body
(3).
4. Take the element holder (4) out of the dust
pan and clean it.
5. Blow dry compressed air "at 0.68 MPa
(7 kgf/cm
2
)" from inside the element to the
filter up and down along the furrows. Keep
a certain distance from the nozzle top to the
filter (approx. 50 cm).
6. Insert a lamp (incandescent lamp) into the
element and turn it on to check damages of
the filter.
Do not use the filter if it has damages,
pinholes, especially thin parts or damaged
seal.
7. Attach the element after cleaning.
8. Attach the dust pan with the arrow mark ( )
on it upward and fix it with the clamp.
•
Replace the element with a new one, regardless of the replacement interval, if it is dirty
with lamp soot, soot or oil.
•
Do not pat, hit or drop the element.
Replace Air Cleaner Element
Disassemble the air cleaner in the same manner as inspection and cleaning procedures and
replace the element with a new one.
•
Be sure to stop the engine when carrying out maintenance of the air cleaner.
If it is carried out while the engine is running, dust is sucked and the engine may be
damaged.
•
Put on protective goggles when cleaning the element using compressed air.
Otherwise, dust may be put in your eyes, which is dangerous.
Cleaning element with air