IHIMER 9VXE, Оригинальное руководство пользователя

Страница: 41 / 118

OPERATION
9VXE ENG 2-13
STOPPING ENGINE
If you touch the operation lever by mistake without locking the operation lock lever, the
machine may move unexpectedly, resulting in a dangerous accident.
Lower the attachment onto the ground, stop the engine and set the operation lock lever to
the lock position before you leave the operator's seat.
••••
Stopping machine
1. Park the machine on a safe, flat and rigid ground not in
danger of stone dropping, landslide, etc.
2. Raise the arm and lower the bucket onto the ground
with its bottom horizontal.
3. Lower the blade onto the ground.
4. Set the gate lock lever to the locked position.
••••
Stopping engine
1. Idle the engine for five minutes or so to lower the
engine temperature.
2. Set the engine key switch to the OFF (stop) position to
stop the engine.
3. Pull out the key from the engine key switch.
••••
Inspection and locking after engine stops
1. Check each part for oil leak, water leak and damages.
Carry out repair work if leak or some abnormality is
found.
2. Refill the fuel tank fully.
3. Remove soil and sand from around the crawlers and
bucket.
4. Lock all the lockable parts such as the fuel port, engine
cover, etc.
WC-C200440
WC-C200450
WB-C210080