IHIMER 9VXE, Оригинальное руководство пользователя

Страница: 55 / 118

OPERATION
9VXE ENG 2-27
Escape from a muddy place
If a single side enters a muddy place, lower the bucket
onto that muddy ground to lift the crawler, place logs,
wood. under the crawler and escape from that place.
If both sides enter a muddy place and the machine cannot
be driven, place logs or wood under crawlers one by one
in the same way as shown above, bite the front ground
with the bucket, pull the arm in the same way as digging
to move the machine, and escape from that place.
Works in water
•
The allowable water depth is up to the center of the
upper roller or the top of the slide pad.
Check the water depth and ground before working in
water or traveling the machine across the river. Do not
go into water deeper than the allowable water depth.
The machine may sink little by little if the ground is soft.
Pay great attention to the footing in work.
If the bucket is dipped in water for long, grease the
pins around the bucket sufficiently until used grease
oozes out.
•
The engine may get wet with water and the radiator fan
may be broken if the machine climbs a steep slope
when going out of water. Be very careful.
Countermeasures if the machine is buried up to the
super structure
If the machine is buried with water, soil or sand up to the
super structure by mistake the swing bearing may wear
abnormally. It is necessary to change grease in the
turning structure or overhaul and repair the turning
structure immediately. Stop operation and ask greasing,
overhaul or repair works from the nearest service office.
WC-C200860
WC-C200870
WC-C200880
WC-C200140
WC-C200890