IHIMER 9VXE, Оригинальное руководство пользователя

Страница: 13 / 118

SAFETY
9VXE ENG 1-3
Perform "walk-around" inspection
Be sure to walk around the machine and inspect it before
starting work. If some defects are found, repair them
without fail.
Prevent a fire
•
Do not leave oiled waste cloth, dead leaves, paper
trash or other flammable objects around the engine.
Such matters may cause a fire. Always inspect and
remove such matters.
•
Stop the engine and do not bring fire close to it while
refilling fuel.
•
Check if fuel, oil or hydraulic oil does not leak. If some
defects are found, repair them and wipe off leaked oil.
•
Check the installation position and usage of the fire
extinguisher.
Install the ROPS canopy
We recommend that the ROPS canopy should be
installed to avoid accidents, which may result in injury, if a
machine with a canopy should fall down.
Carefully mount and dismount the machine
Always use steps and handholds to mount and dismount
the machine.
Hold the handholds with both hands and face the machine
keeping a contact with at least three points of the steps
and handrails.
Never hold control levers at mounting and dismounting.
Start the engine in the operator's seat
If the engine is started from a position other than sitting in
the operator's seat, there is the danger that the machine
starts moving suddenly.
Start the engine only after carrying out checks while
sitting in the operator's seat.