IHIMER 9VXE, Оригинальное руководство пользователя

Страница: 88 / 118

MAINTENANCE
9VXE EN 3-19
WB-C310220
ENGINE OIL
Place the machine in a horizontal place, bring the blade in
contact with the ground, retract the arm cylinder and
bucket cylinder fully, and move down the boom to lower
the bucket onto the ground when executing inspection
and/or maintenance of the lubrication system.
•
Oil is hot immediately after stopping the engine.
You may get burnt if you touch oil. Start work
after oil has cooled down.
•
Wipe off spilt oil completely. If it is left as is, it
may cause a fire.
Check the Engine Oil Level and Refill
1. Stop the engine.
2. Pull out the oil level gauge, clean it with cloth, insert it
fully again, and pull it out slowly.
3. The oil level is proper if it is between the marks of the
upper and lower limits.
Refill the engine with engine oil through the oil filler
port if the oil level is below the lower limit.
4. Discharge excess oil through the drain port if the oil
level is over the upper limit. Check the oil level again.
•
Make the machine horizontal before checking
the oil level.
•
Check the oil level 10 minutes or more after
stopping the engine, if the engine has started.
•
Do not start the engine if the oil level exceeds
the upper limit or below the lower limit.
WC-C300320
Oil level gauge
Upper limit
Lower limit