IHIMER 9VXE, Оригинальное руководство пользователя

Страница: 60 / 118

OPERATION
9VXE ENG 2-32
Double effect use (iron fork)
1. Connect hydraulic pipes to A and B ports.
2. Turn the valve tap (3) with the key CH13 (included)
and move the signal in the indicated position.
If valve sign is as shown in the B port does not
receive pressure.
Keep ALWAYS the signal in the position .
3. Step the pedal (1) to working operation.
4. Pushing on front side of pedal the supply is possible by
means A port. Pushing on rear side of pedal the supply
is by means B port.
5. Step the pedal (1) in neutral position and close the
cover to block it when we do not use the pedal.
•
Make sure that the stop limit of the pedal is
adjusted as shown in the figure, in the case of
new assembly of the pedal or in case of
passage from single to double-acting effect.
•
Adjust height of stop limit (2) in order that the
pedal (1) touches head of screw when is in
neutral
position and avoiding eventual
movement if we push on rear side.
WB-C210510
"B port"
"A port"
WB-C210520
Supply from
port A
Supply from
port B
Lock
position
Working position
WB-C210530
Step on the pedal
Contact with the pedal stopper
when the pedali s stepped on
Operation position
double effect
3