IHIMER 9VXE Скачать руководство пользователя страница 14

Страница: 14 / 118

SAFETY

9VXE ENG

1-4

PRECAUTIONS DURING OPERATION

Stay seated while operating

Never attempt to operate the excavator from any position

except the operator's seat. If you operate the machine

from any other position, such as standing by the window

or door, you may operate the machine inaccurately, which

can cause serious injury. Remember that you should not

get on or off the moving machine to be seated or to leave

the machine.

Fasten the seat belt

If the machine falls down, you may be thrown out of the

operator's seat or pressed under the machine. Such an

accident may result in serious injury or death.

Sit on the operator's seat and fasten the seat belt all the

time while operating the machine.

Clear all personnel from the machine and area

Be sure to barricade the job site to prevent entry of the

unauthorized. Confirm that there is no one around the

machine before starting the engine or operating the

machine.

Prevent accidents while moving

Always sound the horn to signal others nearby that you

are moving the machine. Check that no one is within the

working area of the machine before attempting to move it.

WC-C100630

Keep Out

Содержание 9VXE























































































































Результаты поиска

Содержание 9VXE

Отзывы:

IHIMER 9VXE, Оригинальное руководство пользователя, Страница: 14 / 118

Результаты поиска

Содержание 9VXE

Отзывы: