IDS X16, Руководство по обучению

Страница: 56 / 87

56 Appendix | IDS X Series Training V2.3
The table below shows which locations belong to which partitions.
Location Partitions User Slot Location Partitions User Slot
600 All 609 & 610 5 50 to 59
601 & 602 1 10 to 19 611 & 612 6 60 to 69
603 & 604 2 20 to 29 613 & 614 7 70 to 79
605 & 606 3 30 to 39 615 & 616 8 80 to 89
607 & 608 4 40 to 49
Note: The user code must also be a code that belongs to the partition and entered into the correct user slot
numbers for the partition that the person needs to interact with.
Location 617: User Reporting Codes
Location Type: Bitmap
If open and close reporting is required by default all user options are enable therefore to enable reporting
the global option under partition options, Locations 211 to 218 must be enabled. In this location you can
enable or disable per user.
Option Default Action Description
1 ON Close reporting Enable if a close signal is to me sent to the security company
2 ON Stay Close Reporting Enable if a stay close signal is to me sent
3 ON Open Reporting Enable if a open signal is to me sent
4 OFF Siren Cancel Reporting Enable if the siren is active and a user cancels the siren
5 Reserved
6 OFF AC Fail Reporting Enable if aA signal is to me sent when the electricity goes off
7 OFF AC Restore Reporting Enable ifA signal is to me sent when the electricity is stored
8 OFF Low Battery Reporting Enable if aA signal is to me sent when the battery reaches 10.5V
9 On Auto Test Reporting This is a signal reporting that the alarm is communicating
10 OFF Zone Bypassing Reporting Enable if aA signal is to me sent when zones are bypassed
Location 618: User Split Reporting
Location Type: Bitmap
Select which group of phone numbers to report the user reporting codes per code .
Option Default Action Option Default Action
Close OFF Telephone Module 1 Open OFF Telephone Module 2
Stay Close OFF Telephone Module 1 Siren Cancel OFF Telephone Module 2
Appendix
1. Extra Contact ID Zone Reporting…………………………………………………………………….. 57
2. Communication Default Settings.……………………………………………………………………. 59
3. Features Grouped by Location………………………………………………………………………. 67