IDS X16, Руководство по обучению

Страница: 16 / 87

16 Global Settings | IDS X Series Training V2.3
1. Programming zones using both the string and bitmapped methods.
a. Let‟s program zones 9 to 16 using the string method and zones 17 to 24 using the bitmapped sub-
locaton method
b. The table describes what type of zone each one will be
Zone Type Value Zone Type Value
9 Secondary Entry / Exit 08 17 Entry / Exit 01
10 Follower 02 18 Follower 02
11 Follower 02 19 Instant 04
12 Instant 04 20 Instant 04
13 Instant 04 21 Follower 02
14 Outdoor Instant 15 22 Follower 02
15 Outdoor Instant 15 23 Outdoor Instant 15
16 Panic 03 24 Panic 03
c. To program zones 9 to 16 into the system via the string method:
Instructions Key presses
Enter installer mode [#] [9] [9] [9] [9] [*]
Enter the location 2 [2] [*]
Type in the complete string of information for all
zones [0][8] [0][2] [0][2] [0][4] [0][4] [1][5] [1][5] [0][3] [*]
d. Programming zones 7 and 8 using the sub-location method:
Instructions Key presses
Enter location 1 [1] [*]
Enter the sub-location number for zone 7 and press the [*] key [7] [*]
Enter the value for an external instant zone followed by the [*] key.) [1] [5] [*]
Now zone 8 [8] [*]
Panic zone [0] [3] [*]
To exit location 1 press the [#] key [#]
Note: You will still be installer mode
Global Settings
Location 10: Zone Shutdown Count
Location Type: Standard
This option monitors the zone for the number of times it violates when the system is armed. Once the
number of violations reaches the number entered in this location, the zone is automatically bypassed.
Each partition has an option to enable any zones belonging to the partition that were bypassed due to this
option in locations 221 to 228 depending on the partition.
Valid Range: 1 - 15
Default: 5
Location 11: Programmable Zone Loop Response Time
Location Type: Standard
This is the time that the zone must be violated before the zone will register a violation.
Valid Range: 1 - 255
Default: 2