Ideal AKE AKV 116, Руководство по эксплуатации

Страница: 166 / 168

Subject to technical changes | Valid from July 2021
82
DECLARATION OF CONFORMITY
05
REFRIGERATED DISPLAY CASES
5. DECLARATION OF CONFORMITY MRL 2006/42/EG
EU Declaration of Conformity
in accordance with EU Directives 2006/42/EC and 2014/30/EC
Manufacturer AKE Ausseer Kälte- und Edelstahltechnik GmbH
Pichl 66, 8984 Bad Mitterndorf, ÖSTERREICH
Product Refrigerated display cases for assisted service, insulating glass display cases, self-service
display cases
Type See Chapter 1.3
Year of manufacture From 2021
The compliance of the products stated above with Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU is hereby con -
firmed. The fundamental requirements from Machinery Directive 2006/42/EC and the essential requirements from EMC Directive
2014/30/EU were complied with. The necessary technical documents were prepared and archived. The following harmonised stan
-
dards were applied in their currently valid versions:
EN 60335-1:2012
Household and similar electrical appliances – Safety – Part 1: General Requirements
EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017
(IEC 60335-1:2010, modified)
EN 60335-2-89:2010
Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances
with an incorporated or remote refrigerant condensing unit or compressor EN 60335-2-89:2010 + A1:2016 + A2:2017
(IEC 60335-2-89:2010 + A1:2012, modified);
EN 378-2:2016
Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and
documentation;
EN ISO 12100:2010-11
Safety of machinery - General principles for design – Risk assessment and risk reduction (ISO 12100:2010);
In the event of technical modifications to the product shown above that have not been agreed with the manufacturer,
this EC Declaration of Conformity shall lose its validity.
Bad Mitterndorf, 2021 Andreas Pilz (CTO)
Please observe possible supplementary sheets to this Operating Manual and the associated Declaration of Conformity.
For further information contact the manufacturer.
NOTE
Authorised representative for technical documents