Ideal AKE AKV 116, Руководство по эксплуатации

Страница: 145 / 168

Subject to technical changes | Valid from July 2021 Subject to technical changes | Valid from July 2021
61
REFRIGERATED DISPLAY CASES
4.1.3. CLEANING THE EVAPORATOR
Danger from electrical voltage on live components
The power supply must be disconnected before all cleaning and service work. To do this, unplug the cooling appliance or
disconnect all poles from the power mains.
DANGER
Danger of crushing when handling the evaporator box
When lifting and reinserting the evaporator box, use the metal rod provided for this. When lifting the evaporator box, ensure
that it is lifted until the locking tabs snap into place automatically. Hold the evaporator box firmly on the metal rod firmly or in
position before unlocking.
WARNING
When cleaning the unit, wear the respective protective equipment stipulated by the manufacturer of the cleaning agent
being used (see Chapter 4.1.2). Before cleaning the unit with water, please check that the water can run off. If the unit is
not connected directly to the wastewater system onsite, then a suitably sized container must be placed under the drain.
NOTE
Danger from leaking refrigerant from a damaged evaporator
Do not use any sharp objects for cleaning the evaporator fins. The evaporator fins may only be cleaned using products
specified by AKE.
WARNING
Danger of cutting injuries
The fins of the condenser are very thin and sharp. Avoid direct contact with the fins in order to prevent injuries. Wear the
appropriate protective equipment.
CAUTION