Ideal AKE AKV 116, Руководство по эксплуатации

Страница: 128 / 168

Subject to technical changes | Valid from July 2021
44
OPERATION AND USE
REFRIGERATED DISPLAY CASES
03
3.2.4. SETTING THE TEMPERATURE
The interior temperature is regulated via the controller display of the electronic temperature controller. This is located in the control -
ler housing. The factory-set target value can be shown by pressing the SET button. The desired temperature can be set by holding
the SET button and simultaneously pressing the UP button for a higher temperature, or the DOWN button for a lower temperature.
You can find the exact button assignment in Chapter 3.2.
After the temperature settings have been changed, it takes some time for the unit to reach the desired temperature and stabilise
(check the set temperature with a suitable testing device). The temperature should be set by the supplier or specialist dealer du
-
ring the installation. When selecting the inside temperature take account of the ambient conditions. A large temperature difference
between the inside and outside temperature combined with high air humidity can lead to heavy ice formation and condensate.
This reduces the refrigeration capacity and prevents the automatic defrosting from working properly.
The factory-set target value can be shown by pressing the SET button. This is set accordingly for the unit, and adjust -
ment is only permitted by an authorised specialist.
NOTE
Changes to the temperature setting may lead to spoilage of the products placed in the unit.
The temperature has been factory set for each unit according to specified technical requirements to ensure optimal food
storage. This temperature setting can be changed according to the food placed in the unit, in order to prevent the accumu
-
lation of food waste due to the cooling temperature being set incorrectly.
CAUTION