45
5
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
One-touch reply using the call record
The stored call signs in the call record can be used to call the
other station.
q
After receiving a call, push and hold
[RX
©
CS]
(CS) for
1 sec.
[CS]
The received call sign is displayed
while pushing and holding .
CS
CS
• Set your own call sign (MY) in advance. (pgs. 30, 42, 43)
• The call sign in “CALLER” is stored as “UR,” “RXRPT1” is stored
as “R2” and “RXRPT2” is stored as “R1.”
• Error beeps sound when a call sign is received incorrectly, and
no call sign is set in this case.
w
Push
[PTT]
to transmit; release to receive.
• Selecting a call record via RX CAL screen
q
Select the desired record channel in steps
q
and
w
on
the previous page.
w
Push and hold
[MW]
(S.MW) for 1 sec. to copy the record
channel to current call sign.
e
Push
[PTT]
to transmit; release to receive.
Important!
Setting call signs with the “One-touch reply using the call
record” operation as at left are for temporary operation
only. Therefore, the set call signs will be over-written when
another call record is used to set call signs.
• Never saved into a call sign memory.
If you want to save the set call signs, see “Copying the call
record contents into call sign memory”
(p. 47)
for details.
For your information
When a call specifying your call sign is received, the call
signs of the calling station and the repeater it is using can be
automatically used for operation.
• When “CALL W (RX call sign auto write)”
(p. 135)
is set to
“AUTO,” the station call sign in “CALLER” is set to “UR” au-
tomatically.
• When “RPT W (Repeater call sign auto write)”
(p. 135)
is set
to “AUTO,” the repeater call sign in “RXRPT1” is stored as
“R2” and “RXRPT2” is stored as “R1” automatically.
NOTE:
The One-touch reply function can be used on the
same network system, but it cannot be used over different
network systems.
Содержание ID-E880
Страница 194: ...176 MEMO...
Страница 195: ...177 MEMO...