32
4
DV MODE PROGRAMMING
D
Station call sign programming
Station call sign must be programmed to call a specific sta-
tion as well as for repeater operation in both digital voice and
low-speed data communications.
q
Enter “UR” in call sign screen.
MENU
¶
CALL-S
¶
UR
(Push
[MENU
]
), (rotate
[DIAL]
, then push
[
]
(MONI).)
• UR call sign screen is displayed.
w
Rotate
[DIAL]
to select the desired call sign memory,
“U01” to “U60.”
e
Push
[
]
(LOW) to enter call sign programming mode.
• The 1st digit blinks.
r
Rotate
[DIAL]
to select the desired character or code.
• Push
[
]
(LOW) or
[
]
(CS) to move the cursor right or left, re-
spectively.
t
Repeat the step
r
to enter the desired station call sign.
• Up to an 8 digit call sign can be set.
• If an unwanted character is entered, push
[
]
(LOW) or
[
]
(CS)
to select the character, then push
[CLR]
(DR) to erase the se-
lected character, or push and hold
[CLR]
(DR) for 1 sec. to erase
all characters following the cursor.
y
Push
[
]
(MONI) to store the programmed call sign and
return to UR call sign screen.
u
Push
[MENU
]
to return to frequency indication.
For your information
The ID-E880 has a call sign edit record function.
When editing a call sign stored in a call sign memory (or reg-
ular memory/call channel), the default setting is to store the
edited call sign into a blank channel automatically. (When all
call sign memories are already programmed, the edited call
sign will overwrite the selected channels call sign.)
The programmed call sign can be over-written when the set-
ting of “EDIT R” (Edit record) is set to OFF or SEL.
(p. 135)
However, you must manually over-write a reprogrammed call
sign in regular memory/call channels (temporary operation
without over-writing is possible).
Содержание ID-E880
Страница 194: ...176 MEMO...
Страница 195: ...177 MEMO...
