Icom ID-E880, Инструкция по эксплуатации

Страница: 122 / 196

8
SCAN OPERATION
MW
z
Push [MR/CALL] to select the memory mode.
x
Select scan edge channel, 0A to 24A using
[
Y
]/[
Z
] or keypad.
• Push [
ENT
C(T-OFF)] then push only 1 or 2 appropri-
ate digit key(s), [
VOL
Y
0(TONE-2)] to [
SIMP
9(16-KEY-
L)] then push [
VOL
Z
M
(TONE-1)] or [
SQL
Z
#(16KEY-L)]
to select scan edge channels. “
M
” and “#” can be used
for “A” and “B” respectively.
c
Set the desired frequency in the VFO mode.
± Push [VFO/LOCK] to select the VFO mode.
±
Set the frequency via the keypad or [
Y
]/[
Z
].
v
Push [FUNC], then push and hold [
CLR
A(MW)] for 1 sec.
to program.
• 3 beeps sound and the VFO is automatically selected.
• Memory channel number advances to the next scan edge chan-
nel, 0B to 24B when continuing to push [
CLR
A(MW)] after pro-
gramming.
b
To program a frequency for the other scan edge channels,
repeat steps
z
to
v
.
D
Programming scan edges via the microphone
Push Push , then push
Push then for 1 sec. and continue to push
Push
[EXAMPLE]: Programming 145.800 MHz into scan edges 4A.
Push
104