Icom ID-E880 Скачать руководство пользователя страница 44

Страница: 44 / 196

REPEATER OPERATION

DTMF tones

DTMF-S

Push [DTMF-S], then push the keys of the de-

sired DTMF digits.

• The function indicator lights green.
• 0–9, A–D,

(E) and #(F) are available.

• When “

” is displayed in place of the 100 MHz

digit, cancel the DTMF memory encoder in ad-
vance. (p. 143)

• Push [DTMF-S] again to return the keypad to nor-

mal function control.

then push desired keys.

Push ,

For your convenience!

The transceiver has 16 DTMF memory channels for auto-
patch operation. See p. 144 for details.

1750 Hz tone

The microphone has 1750 Hz tone capability, used for ring
tone when calling, etc.

TONE-1

TONE-2

Push [FUNC].

• The function indicator lights orange.

Push [

(TONE-1)] to transmit a 1750 Hz

tone call signal for 0.5 sec.; push and hold
[0(TONE-2)] to transmit a 1750 Hz tone call
signal for an arbitrary period.

• The function indicator goes out automatically.

Push ,

then or .

Содержание ID-E880





































































































































































































Результаты поиска

Содержание ID-E880

Отзывы:

Бренды по названию

Популярные бренды

Icom ID-E880, Инструкция по эксплуатации

Результаты поиска

Содержание ID-E880

Отзывы:

Бренды по названию

Популярные бренды