146
TONE SQUELCH AND POCKET BEEP
12
N
Tone/DTCS squelch (beep) operation
q
Set the desired operating frequency and the desired oper-
ating mode.
w
Set the desired CTCSS tone or DTCS code.
See pages 147–149.
e
Push and hold
[TONE]
(M/CALL) for 1 sec. to enter the
tone selection state.
r
Rotate
[DIAL]
to select the desired squelch system, then
push
[TONE]
(M/CALL) again.
•
“
T SQL”: Tone squelch with pocket beep, “T SQL”: Tone
squelch, “
DTCS”: DTCS squelch with pocket beep, “DTCS”:
DTCS squelch
[DIAL]
[TONE]
t
When a signal with the correct tone or code is received, the
transceiver’s mute is released and received audio sounds.
•
Emits beep tones for 30 sec. and blinks “
” if pocket beep is
selected in step
r
.
y
Push
[PTT]
to answer or push
[CS]
to stop the beeps and
blinking.
Pocket beep
DTCS beep
TSQL
,
DTCS
,
z
Set the operating frequency.
x
Push [FUNC] then push one of following keys
to turn the desired squelch system ON.
•
[
HIGH
4(DTCS)]
: DTCS squelch
•
[
MID
5(DTCS
S
)] :
DTCS squelch with pocket
beep
•
[
DUP
+ 8(TSQL
S
)] : Tone squelch with pocket
beep
•
[
SIMP
9(TSQL)]
: Tone squelch
c
When a signal with the correct tone or code
is received, the transceiver’s mute is released
and received audio sound.
•
Emits beep tones for 30 sec. and blinks “
” if
pocket beep is selected in step
x
.
v
Push [PTT] to answer or push [
CLR
A(MW)] to
stop the beeps and blinking.
•
“
” disappears and cancels the pocket beep
function automatically.
b
To cancel the tone squelch or DTCS squelch
function, push [FUNC] then [
ENT
C(T-OFF)].
• “TSQL” or “DTCS” disappears
NOTE:
• The tone/DTCS code squelch opens sometimes when
other stations communicate using an adjacent tone fre-
quency or in a DTCS code.
• The tone/DTCS code squelch can be operated on the FM
or FM-N mode only.
Содержание ID-E880
Страница 194: ...176 MEMO...
Страница 195: ...177 MEMO...