Icom ID-E880, Инструкция по эксплуатации

Страница: 86 / 196

68
5
DV MODE OPERATION
N
Break-in communication
The break-in function allows you to break into a conversa-
tion, where the two original stations are communicating with
call sign squelch enabled.
q
While receiving an another station’s communication, push
and hold [RX
©
CS] (CS) for 1 sec. to set the communicating
station’s call sign.
• When a call sign has not been received correctly, error beeps
sound and no call sign is set. Try to set the call sign of a com-
municating signal again, or set the call sign manually.
w
Enter “BK” in DV SET mode.
MENU ¶ DV SET ¶ BK
(Push [MENU ] ), (rotate [DIAL] , then push [ ] (MONI).)
• BK screen is displayed.
e
Rotate [DIAL] to turn the Break-in function ON or OFF.
• When "ON" is selected, “BK” appears instead of memory chan-
nel indication
r
Push [ ] (MONI).
• Returns to DV SET mode.
t
Push [MENU ] to return to frequency indication.
“BK” appears
y
When both stations are in standby, push [PTT] to transmit
a break-in call.
• The programmed call sign station receives the break-in call as
well as your call sign.
u
Wait for the reply call from the station who receives the
break-in call.
i
After receiving the reply call, communicate normally.
o
To cancel the break-in function, turn the Break-in function
OFF in the DV SET mode as steps
w
to
t
.
NOTE: The break-in function is turned OFF automatically
when turning transceiver’s power OFF.