Icom ID-E880 Скачать руководство пользователя страница 58

Страница: 58 / 196

DV MODE PROGRAMMING

New2001

Gateway repeater call sign programming (GW CAL)

Push

[ ]

(MONI) to enter the gateway repeater call sign

programming.

• Gateway repeater call sign programming screen is displayed.
• Programmed repeater call sign is displayed, then the 1st char-

acter blinks.

• The 8th digit is automatically added or replaced to “G.”

Rotate

[DIAL]

to select the desired character, number,

symbol (‘/’ only) or space.

• The selected character blinks.
• Push

[

]

(LOW)

to move the cursor right; push

[

]

(CS) to move

the cursor left.

• Push

[CLR]

(DR) to erase the selected character, or push and

hold

[CLR]

(DR) for 1 sec. to erase all characters following the

cursor.

Repeat step

until the desired repeater call sign is pro-

grammed.

• Call sign can be up to 8 digits long, but 8th digit must be set to “G.”

Push

[ ]

(MONI) to program the gateway repeater call

sign and exit the state.

■

Changing a repeater list

This function re-programs a repeater list’s contents. This is
useful when already-programmed contents are mistaken or
some contents are added to the list.

Enter “EDIT-L” in RPT-L menu.

➪

RPT-L

➪

EDIT-L

(Push

[MENU

]

), (rotate

[DIAL]

, then push

[ ]

(MONI).)

• Programmed repeater name appears.

SKIP indicator

SKIP indicator shows the selected repeater can not be used
for access repeater (RPT1) in DR mode as follow reasons.

• “R1 USE” is set to “NO.”
• Either “FREQ” (frequency) or “DUP” (duplex direction)
has not been programmed.

Push and hold

[BAND]

for 1 sec. to enter group selection,

rotate

[DIAL]

to select the desired group (0–9), then push

[BAND]

Содержание ID-E880





































































































































































































Результаты поиска

Содержание ID-E880

Отзывы:

Похожие инструкции для ID-E880

Бренды по названию

Популярные бренды

Icom ID-E880, Инструкция по эксплуатации

Результаты поиска

Содержание ID-E880

Отзывы:

Похожие инструкции для ID-E880

Бренды по названию

Популярные бренды