Icom ID-E880 Скачать руководство пользователя страница 41

Страница: 41 / 196

REPEATER OPERATION

Accessing a repeater

Set the receive frequency (repeater output frequency).

(pgs. 14, 15)

Push and hold

[DUP]

(LOW) for 1 sec. to enter the duplex

setting condition.

Rotate

[DIAL]

to select minus duplex or plus duplex.

• “DUP–” or “DUP” appears to indicate the transmit frequency for

minus shift or plus shift, respectively.

• Push

[DUP]

(LOW) again to return to the frequency indication.

[DUP]

“DUP–” or “DUP” appears

Push and hold

[TONE]

(M/CALL) for 1 sec. to enter the

tone setting condition.

Rotate

[DIAL]

to turn ON the subaudible tone encoder, accord-

ing to repeater requirements, then push

[TONE]

(M/CALL).

• “T” appears
• 88.5 Hz is set as the default; refer to p. 25 for tone frequency

settings.

• When the repeater requires a different tone system, see p. 26.

[TONE]

“T” appears

Push and hold

[PTT]

to transmit.

• The displayed frequency automatically changes to the transmit

frequency (repeater input frequency).

• If “OFF” appears, conﬁrm that the frequency offset (p. 27) is set

correctly.

Release

[PTT]

to receive.

While receiving

While transmitting

Push

[MONI]

to check whether the other station’s transmit

signal can be received directly.

To return to simplex operation, push and hold

[DUP]

(LOW)

then rotate

[DIAL]

, to clear the “DUP–” or “DUP” indicator.

• Push

[DUP]

(LOW) again to return to frequency indication.

To turn OFF the subaudible tone encoder, push and hold

[TONE]

(M/CALL) then rotate

[DIAL]

until no tone indicator

(OFF) appears.

• Push

[TONE]

(M/CALL) again to return to frequency indication.

Содержание ID-E880





































































































































































































Результаты поиска

Содержание ID-E880

Отзывы:

Похожие инструкции для ID-E880

Бренды по названию

Популярные бренды

Icom ID-E880, Инструкция по эксплуатации

Результаты поиска

Содержание ID-E880

Отзывы:

Похожие инструкции для ID-E880

Бренды по названию

Популярные бренды