Icom ID-E880 Скачать руководство пользователя страница 139

Страница: 139 / 196

121

MENU SCREEN OPERATION

DUP.T mode items

Frequency offset

Sets the frequency offset for duplex

(repeater)

operation within

a 0 to 159.995 MHz range.

During 1 MHz step setting

Push

[VFO/MHz]

each time to selecting the 10 MHz,

1 MHz step and the setting with the tuning step, selected
in the VFO mode, in sequence.

•

The default value may differ according to the selected frequency
band (before accessing DUP.T mode) and transceiver version.

The selected tuning step in the VFO mode is used when
setting the frequency offset.

Repeater tone frequency

Selects subaudible tone frequency for accessing a repeater,
etc. 50 tone frequencies

(67.0–254.1 Hz)

are available.

(default: 88.5)

TSQL frequency

Selects tone frequency for tone squelch or pocket beep oper-
ation from one of 50 available frequencies

(67.0–254.1 Hz)

(default: 88.5)

• Available tone frequencies

67.0
69.3
71.9
74.4
77.0

79.7
82.5
85.4
88.5
91.5

94.8
97.4

100.0
103.5
107.2

110.9
114.8
118.8
123.0
127.3

131.8
136.5
141.3
146.2
151.4

156.7
159.8
162.2
165.5
167.9

171.3
173.8
177.3
179.9
183.5

186.2
189.9
192.8
196.6
199.5

203.5
206.5
210.7
218.1
225.7

229.1
233.6
241.8
250.3
254.1

The transceiver has 50 tone frequencies and consequently

their spacing is narrow compared with units having 38
tones. Therefore, some tone frequencies may receive in-
terference from adjacent tone frequencies.

Содержание ID-E880





































































































































































































Результаты поиска

Содержание ID-E880

Отзывы:

Бренды по названию

Популярные бренды

Icom ID-E880, Инструкция по эксплуатации

Результаты поиска

Содержание ID-E880

Отзывы:

Бренды по названию

Популярные бренды