manualshive.com logo in svg

Icom ID-E880, Инструкция по эксплуатации

Поделиться
Скачать
Icom ID-E880 Скачать руководство пользователя страница 152

134

10

MENU SCREEN OPERATION

N

 DV SET mode items

D

 Auto reply 

Use this function to reply a station calling when you are away 
from the transceiver.
After a manual transmission (pushing 

[PTT]

), the Auto Reply 

setting returns to OFF automatically.

• OFF 

:  No reply is performed even if a call is received. 

(default)

• ON 

:  Sets the caller's call sign and replies to the call 

with the programmed own call sign.

D

 DV data TX 

During low-speed data operation, auto data transmission 
function is available. This function activates to transmit au-
tomatically when the PC software sends data to the ID-E880 
via the 

[DATA]

 jack.

• PTT 

:  Data from [DATA] transmits when [PTT] is 

pushed. (default)

• AUTO  :  Data from [DATA] transmits automatically.

D

 Digital monitor 

Selects the desired monitoring mode during DV mode opera-
tion between “Auto,” “Digital” and “Analog.”

• AUTO    :  The transceiver sets monitoring mode to the FM 

and DV according to the received signal. 

(de-

fault)

• DIGI 

  : Monitors in the DV mode.

• ANALOG : Monitors in the FM mode.

D

 Digital repeater setting 

When accessing a D-STAR repeater that has a call sign is 
different than the transceiver’s current call sign, the repeater 
call sign can be stored into “RPT1” automatically by read-
ing the repeater’s downlink signal. The previously stored re-
peater’s call sign can be recalled when selecting the repeater 
call sign.

(default: ON)

Содержание ID-E880





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды