Icom ID-E880 Скачать руководство пользователя страница 30

Страница: 30 / 196

BASIC OPERATION

VFO mode

VFO mode is used to set the desired frequency.

Push

[VFO/MHz]

to select the VFO mode.

•

When the VFO mode is already selected, the digits to the right of
the 10 MHz will disappear. In this case, push

[VFO/MHz]

twice.

[VFO/MHz]

• VFO mode indication

VFO/LOCK

Push [VFO/LOCK] to select the VFO mode.

What is VFO?

VFO is an abbreviation of Variable Frequency Oscillator. Fre-
quencies for both transmitting and receiving are generated
and controlled by the VFO.

Memory mode

Memory mode is used for operation on the memory channels
which store programmed frequencies.

Push

[M/CALL]

to select the memory mode.

• Push [M/CALL] several times to select Memory/Call channels

in sequence.

• “

” indicator appears when the memory mode is selected.

Appears

[M/CALL]

• Memory mode indication

Rotate

[DIAL]

to select the desired memory channel.

• Only programmed memory channels can be selected.
• See p. 90 for memory programming details.

MR/CALL

Push [MR/CALL] to select the memory

mode.

Push

[

]

[

]

to select the desired mem-

ory channel.

Содержание ID-E880





































































































































































































Результаты поиска

Содержание ID-E880

Отзывы:

Бренды по названию

Популярные бренды

Icom ID-E880, Инструкция по эксплуатации

Результаты поиска

Содержание ID-E880

Отзывы:

Бренды по названию

Популярные бренды