Printed in U.S.A.
8-08
©
Copyright 2008 TAC All Rights Reserved.
F-26159-5
Application
The CP-8551 and CP-8552 transducers receive a
variable electronic input signal and produce a 3 to 15
psig (21 to 103 kPa) pneumatic output signal to position
pneumatic damper and valve actuators in HVAC
systems.
Features
•
Durable enclosure with easily accessible wiring
terminations
•
Panel or DIN rail mounting for quick, snap-on
installation
•
Two-wire loop powered or three-wire voltage input
•
High accuracy with low hysteresis
•
Long-term driftless operation with high repeatability
•
Low air consumption and large air flow capacity
•
Control input protection from short circuit or reverse
polarity
Applicable Literature
•
TAC Environmental Controls Reference Manual,
F-21683
•
EN-123 Air Quality Requirements for Pneumatic
HVAC Control Systems Engineering Information,
F-22516
•
TAC Pneumatic Products Catalog, F-27383
CP-8551 & CP-8552
Electronic to Pneumatic Transducers
General Instructions