![background image](http://html1.mh-extra.com/html/clas-ohlson/smp-500a005usb/smp-500a005usb_instruction-manual_2617541001.webp)
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
ENGLISH
200807
Operating Instructions
1. Make sure that the current used by the connected
device does not exceed 1 A.
2. Connect the USB cable to the adaptor.
3. Find out which of the adaptor’s DC connectors fits
your product (try the connectors for size while they
are still loose). Join the DC charger connector to the
adaptor’s cable connector by pushing
them together.
4. Make sure that the DC power adaptor connector
and cable connector are securely connected.
5. Connect the DC power connector to the load de-
vice. Make sure that the load device is turned off
before connecting the DC plug.
6. Connect the adaptor to the mains, the LED should
light up.
7. Turn on the load device.
Care and Maintenance
Unplug the adaptor before cleaning.
Use a soft, dry cloth to clean the device.
Never use strong detergents or solvents for cleaning.
Disposal
Dispose of properly, sort and recycle
where possible. All electronic products,
batteries and packaging material etc.
should be sorted and processed according
to local environmental regulations.
Specifications
Rated Voltage
Input Power:
100 – 240 V AC, 50/60 Hz
Output Power:
5 V DC (1000 mA)
AC/DC Adaptor
Article number 36-3311 • Model SMP-500A005USB
Please read the entire instruction manual before using the product and save it for future reference. We apologise for
any text or photographic errors and any changes of technical data. If you have any questions concerning technical
problems please contact our Customer Service Department.
Safety
•
The product should only be repaired by qualified
service personnel.
•
The product should not be taken apart or modified.
•
Do not place the product where it could fall into
water or other type of liquid.
•
Do not expose the product to impact or vibrations.
•
Do not short circuit the adaptor’s terminals.
•
Check that the connection’s polarity and voltage are
correctly set.
•
Do not connect devices that use more than 1000 mA.
•
Disconnect the adaptor from the mains when not
in use.
•
Make sure that the load device is turned off before
connecting it to the adaptor.
Caution:
•
Incorrect voltage or polarity can cause damage to
connected devices.
•
Turn off the connected device before you connect
or remove the adaptor plug.
•
Always check the polarity with a multimeter or
equivalent instrument if you are in the least unsure.
Product Description
• Energy saving adaptor with auto shut-off which
completely turns off the adaptor and draws no cur-
rent if no device is connected.
• Suitable for charging MP3 players or other devices
that are normally charged or powered via a
USB port.
• Includes seven interchangeable connectors and a
PSP plug. The connectors can only be fitted to the
USB cable in one way and cannot be fitted incorrectly.
• Cable length: 0.6 m.
• Stabilised output: 5 V DC
• Load capacity: 1 A.
• Protected against short circuiting.
Contents:
• AC/DC Adaptor
• USB cable
• 7 mobile phone charger conn one PSP plug