IBM ThinkPad 760C, Руководство по обслуживанию

Страница: 66 / 327

Using Easy-Setup
Using the Selectable Drive-Startup Sequence
Warning:
If you change your startup
sequence, you must be extremely
careful when you do write
operations (such as copying,
saving, or formatting). Your data
or programs can be overwritten if
you select the wrong drive.
Selectable drive startup ( selectable boot) allows you to control the
startup sequence of the drives in your computer. The order in which
the computer searches the drives for your operating system is the
drive-startup sequence. If you are working with multiple operating
systems, you might want to change the drive-startup sequence to
load an operating system from the hard disk or a PC Card without
checking the diskette drive, or to do a remote program load (RPL).
Changing the Startup Sequence
To change the startup sequence:
To start Easy-Setup:
Page 44.
1
Start Easy-Setup and select the Start up icon.
2
Move the cursor to the Reset icon; then press the
Spacebar.
The sequence is reset, and all available device icons appear
at the bottom of the screen. For the meaning of the icons, see
page 47.
Note:
You cannot set a hard disk drive
before a
PCMCIA in the startup
sequence.
3
Move the cursor to the icon for the first device in the
startup sequence; then press the Spacebar.
Repeat this step to set the other devices for the startup
sequence. You can set up to four devices.
4
Click on OK or press Enter to save the change.
Chapter 3. Operating Your Computer
49